温度对生物净化滤柱中氨氮、铁、锰去除效果的影响

温度是生物净化滤柱运行的一个重要参数，采用生物净化滤柱处理模拟含氨氮、铁、锰地下水，考察水温从约25℃降到约6℃过程中氨氮、铁、锰的去除效果。结果表明，出水氨氮、总铁、锰的浓度分别低于0.15mg/L、0.1mg/L、0.05mg/L，均低于国家标准。出水总铁、锰均未受到水温下降的影响，但是出水氨氮浓度逐渐从约0.02mg/L升高到约0.12mg/L。进一步分析发现，铁主要在滤层的0~0.4m段去除，去除效果没有受到水温变化的影响。氨氮、锰主要在滤层的0~0.8m段去除，其沿程浓度均随水温降低而明显升高。氨氮、锰的生物去除符合一级动力学反应，水温为24.6℃、15.3℃、6.7℃时，两者的动力学常数k分别为0.154min^-1、0.186min^-1，0.143min^-1、0.175min^-1，0.103min^-1、0.163min^-1；半反应时间t_1/2分别为4.51min、3.72min，4.83min、3.96min，6.72min、4.24min。随着试验水温的降低，氨氮、锰的去除效果明显受到影响。     

高精度多环片自动装配控制技术

为了实现对微小环片零件的自动化装配,搭建了自动装配系统.通过4根直线导向轴与4个直线轴承来提高系统的导向精度和刚度.采用直线导轨进行各装配作业模块之间的切换,保证了微小环片零件的自动装配与取出.在环片的装配方向上,螺旋升降机和光栅尺实现环片的位置精度控制.在Lab VIEW编程环境中,采用分层软件架构和模块化控制思想,避免了不必要的数据循环检测与丢失,能够达到环片组件的装配精度要求.控制系统分为系统初始化模块、参数设置模块、装配模块和取出模块,自动装配系统通过各个模块间的相互交流配合完成装配任务.采用本文中自动装配系统装配环片的实验结果表明,环片零件装配的最大位置误差为26μm,垂直度误差为17μm,平均装配时间为75 s/片,可满足环片组件所需的精度要求.     

Durable,Sensitive, and Wide‐Range Wearable Pressure Sensors Based on Wavy‐Structured Flexible Conductive Composite Film

Flexible pressure sensors have potential applications in human motion monitoring and electronic skins. To satisfy the practical applications, pressure sensors with a high sensitivity, a low detection limit, a broad response range, and an excellent stability are highly needed. Here, a piezoresistive pressure sensor based on wavy‐structured single‐walled carbon nanotube/graphite flake/thermoplastic polyurethane (SWCNT/GF/TPU) composite film is fabricated by a prestretching process. Due to the random wavy structure, high conductivity, and good flexibility, the prepared sensor displays a low detection limit of 2 Pa, a wide sensing range of 0–60 kPa, and a high sensitivity of 5.49 kPa^?1 for 0–50 Pa. Furthermore, the sensor shows a remarkable repeatability of over 1.1 × 10⁴, 9.0 × 10³, and 2.0 × 10³ pressure loading/unloading cycles at 50 Pa, 500 Pa, and 30 kPa, respectively, and a fast responsibility of 100–150 ms of loading response time and 400–600 ms of relaxation time. Therefore, the pressure sensor is successfully adopted to monitor both the large‐scale human activities (e.g., walk and jump) and the small‐scale signals (e.g., wrist pulse). Furthermore, a sensor array is assembled to map the weight and shape of an object, indicating its various potential applications including human–machine interactions, human health monitoring, and other wearable electronics.     

一种军棋机器博弈的多棋子协同博弈方法

针对在军棋博弈不完全信息对弈中，面对棋子不同价值、不同位置、不同搭配所产生的不同棋力，传统的单子意图搜索算法，不能满足棋子之间的协同性与沟通性，同时也缺乏对敌方的引诱与欺骗等高级对抗能力。本文提出一种结合UCT搜索策略的高价值棋子博弈方法，实现高价值棋子协同博弈的策略。实战经验表明:高价值多棋子军棋协同博弈策略优于单棋子军棋博弈策略。     

冷轧退火对FeMnCoCrAl高熵合金组织和力学性能的影响

使用真空电弧炉熔炼出(Fe₅₀Mn₃₀Co₁₀Cr₁₀)₉₄Al₆合金,利用冷轧及在不同温度对合金进行退火,以期望得到由多尺度再结晶晶粒构成的层状结构;并对不同退火温度的样品进行拉伸性能测试。利用扫描电镜和EBSD对合金组织形貌进行表征,采用X射线衍射方法研究其相组成。结果表明:合金在铸态和冷轧后相组成未发生变化,700 ℃退火得到较好的多尺度再结晶晶粒的层状结构,其屈服强度为487 MPa,抗拉强度为708 MPa,断后伸长率为39%,表现出良好的综合力学性能。     

电子行业用高纯钯的制备研究

高纯钯在电子行业等领域应用广泛，需求迫切。以氯化钯为原料，提出采用氯化铵沉淀-氨水配合联合工艺净化钯溶液，水合肼还原纯净钯溶液制备高纯钯。结果表明，固体氯化钯溶解后，在合适的条件下，该钯溶液经过氧化-氯化铵沉淀、氨水配合有效去除杂质元素，获得纯净二氯四氨合钯溶液，再经水合肼还原后，获得纯度99.999%高纯钯，其碳、氧、氮等杂质元素总含量小于355×10^-6。     

High-Tg porous polyimide films with low dielectric constant derived from spiro-(adamantane-2,9′(2′,7′-diamino)-fluorene)

Porous polyimide (PI) films with low dielectric constants and excellent thermal properties have been a pressing demand for the next generation of high-performance, miniature, and ultrathin microelectronic devices. A series of novel porous PI films containing fluorenyl-adamantane groups were prepared successfully via thermolysis of poly(ethylene glycol) (PEG) added in the PI matrix. The cross-sectional morphologies of porous PI films showed closed pores with diameters ranging from 135 to 158 nm, which were uniform and regular in shape without interconnectivity. These porous PI films exhibited excellent thermal properties with a glass-transition temperature at 376 °C whereas the 5% weight loss temperature in air excess of 405 °C due to enhanced rigidity afforded by fluorenyl-adamantane groups. Accompanied by thermolysis content of PEG increasing from 0 to 20 wt %, the density of porous PI films decreased, and the corresponding porosity grew significantly from 0 to 11.48%. Depending on porosity, the dielectric constant and dielectric loss of porous PI films significantly declined from 2.89 to 2.37 and from 0.050 to 0.021, respectively. These excellent properties benefit the as-prepared porous PI films for application as interlayer dielectrics, integrated circuit chips, or multichip modules in microelectronic fields. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47313.     

高地压严重突出区域下向穿层钻孔预抽消突技术

利用工作面高抽巷施工掩护顺槽掘进工作面下向穿层条带预抽钻孔,通过对钻场底板深、浅孔注浆封堵围岩裂隙解决了孔内返水不畅难题;采取了"两堵一注"封孔方式确保封孔严密不漏气;孔内全程下吹水管,实现了单孔、分组、定时吹水工作目标,提高了下向消突钻孔抽采效果,形成了一套高效、快速的下向穿层钻孔消突管理模式,实现了高地压严重突出区域煤层高效消突以及技术经济一体化目标,安全经济效益显著。     

熵模糊物元分析法在水库正常高水位决策中的应用

基于信息熵理论和模糊物元分析理论,探讨了水库正常高水位的熵模糊物元决策模型.以待选方案与最优方案间的海明贴近度来决策水库正常高水位.在确定评价综合指标信息熵的熵权和专家知识权重的的过程中,充分挖掘待选方案的固有信息和避免个人主观因素的弊端.实例应用表明,该方法有效、可行.     

高浓度聚合物驱提高采收率方法实验研究

为探索一种新的提高原油采收率的方法,在外形尺寸为4.5 cm×4.5 cm×30 cm、气测渗透率0.9~1.0μm2、变异系数为0.72的二维纵向非均质人造岩心上,模拟大庆油田油藏流体性质及温度条件,研究了高浓度聚合物(HPAM)驱注入时机、聚合物相对分子质量、聚合物段塞体积及段塞组合对驱油效果的影响。通过注入大分子量、高浓度聚合物,结合合理的注入方式,在化学剂成本与三元复合驱相当的情况下,采收率比水驱提高20个百分点以上,接近或超过三元复合驱的水平。实验表明,采用高浓度聚合物驱油是一种较好的提高原油采收率的方法。